1. Capacity: 1-10 tons per hour
2. Raw Materials: poultry and animal feces manure, carbon black,pottery clay ,kaolin etc
3. Applicated range: organic fertilizer production
4. Advantage: widely using; high granulating rate; stable working; easy operation
Product Introduction
Organic Fertilizer Mixing Granulator is also called wet fertilizer granulator or stirring tooth granulator. It can not only granulate a variety of organic matter, but also is especially able to granulate the coarse fiber material that difficult to be granulated by conventional equipment, such as crop straw, wine dregs, mushroom residue, drug residue, animal manure and so on. In addition, Organic Fertilizer Mixing Granulator also has a good granulation effect on the humic acid, municipal sludge and other similar raw materials. The raw materials need not to be dried before granulation, after screwing, ball shape fertilizers will be out easily.
Features
1. High granulation rate, dense granularity. The ratio can be 90% above
2. Wet raw materials are available processing, no need drying before granulating
3. No binder need to add, materials inside will grow inlaid with each other under certain force.
4. Perfect ball shape fertilizers, moisture 20%-40%
5. Heavy seamless steel pipe ensure stable machine running
Technical Parameter
|
Model
|
JCZ-60
|
JCZ-80
|
JCZ-100
|
|
Power
|
37KW
|
55KW
|
75KW
|
|
Capacity
|
1-2 T/H
|
2-4 T/H
|
5-8 T/H
|
|
Dimension
|
4100*1600*1150mm
|
4250*1850*1300mm
|
4700*2350*1600mm
|
|
Installation Angle
|
2°-2.5°
|
2°-2.5°
|
2°-2.5°
|
|
Inlet Moisture Content
|
20%-40%
|
20%-40%
|
20%-40%
|
|
Inlet Materials Size
|
50mesh
|
50mesh
|
50mesh
|
Advantage
1. Widely raw materials processing, especially wet raw mateirals
2. Energy saving, can be screened directly after granulating
3. High granulating rate, 90% above
4. Hard granules in ball shape, good performance
5. Stable machine running, easy operating and maintain
Working Principle
Composted materials can be sent to Organic Fertilizer Mixing Granulator with mixing. After materials enter into the machine through the feeding inlet, by the high speed rotating mechanical stirring force and aerodynamic force thereof, the materials are mixed, granulated, spherified and densified in the machine, achieving the aim of granulation. The formed granules are pushed out in the other end of the equipment.
The diameter of the produced granules can be controlled by adjusting the quantity of the raw materials and rotating speed of main shaft. The less the raw materials mixed and the higher the rotating speed, the smaller the granulated fertilizer.
